Magnetic Fabric Banner Stands & Magnetic Pop Up Display Stands

How the MagLock Magnetic Connection System Works

Standard tube-frame banner stands use push-button connectors or friction-fit joints that require you to identify the correct tube by number, align the button, and press until it clicks. The MagLock system replaces the manual connector entirely with magnets embedded inside the aluminum tube ends. When you bring two tube sections near each other, the magnetic field does the alignment and connection automatically — the tubes find each other and lock without any effort on your part.

The same magnetic connection that holds the frame together also works between separate stand units. Align the edge of one magnetic fabric banner stand with the edge of another MagLock unit — straight next to curved, slope next to arch — and the embedded magnets create a seamless joint between them. From a viewer's perspective across a trade show floor, the result is a unified display wall with no visible hardware gaps, no visible poles between sections, and no inconsistency in the fabric surface tension across the combined units.

The frame tubes are made from 32mm diameter anodized aluminum with 1mm wall thickness — lightweight enough to carry without strain but rigid enough to hold a 240g tension fabric graphic taut across the full display height without sagging. Every unit ships with a carry bag, an installation toolkit, and a setup guide, though most customers find the magnetic system intuitive enough to assemble successfully on the first attempt without referring to instructions.

Magnetic Fabric Banner Stand Shapes & Configurations

All units in our magnetic fabric banner stand range use the same MagLock frame system and are compatible with each other for modular configurations. The shape you choose determines the visual geometry of your display — and multiple shapes can be combined in any order to build the exact booth footprint you need.

Magnetic Straight Fabric Banner Stand

The foundation of the MagLock range. A magnetic straight banner stand creates a clean, flat vertical display surface — the right choice for step-and-repeat patterns, full-bleed photographic backdrops, sponsor walls, and any brand application where an undistorted flat graphic surface is the visual priority. Multiple straight units connect edge-to-edge to build a wider seamless wall without gaps. Available in standard heights from 6.5ft to 8ft.

Magnetic Curved Fabric Banner Stand

A magnetic curved banner stand uses the same MagLock tube frame in a gently bowed configuration that faces the viewer and creates the sense of a three-dimensional branded environment rather than a flat wall. Curved units are self-supporting due to the arc geometry — no floor feet required at the front — which keeps the display approach completely clear. The curved shape adds depth to a booth layout and performs particularly well in open-floor event spaces where the display needs to command attention from multiple approach angles.

Magnetic Slope Fabric Banner Stand

A magnetic slope banner stand uses an angled frame that leans the top of the display forward toward the viewer. This creates a dynamic, architectural look that draws the eye upward and differentiates the booth from the flat-wall aesthetics of neighboring exhibitors. Slope units are popular as accent pieces within a larger modular MagLock configuration — flanking a central straight or curved unit to add visual complexity without adding significant footprint.

Magnetic Arch Fabric Banner Stand

A magnetic arch banner stand uses a frame that curves over the top to create an archway or arced display profile. As a standalone unit it works as a striking trade show entrance frame, a branded event gateway, or a centerpiece display in a retail activation. Combined with straight or slope units in a larger MagLock wall configuration, an arch unit adds a premium architectural focal point that elevates the entire display to something that reads as custom-built rather than off-the-shelf.

Magnetic Modular Display Configurations

The real commercial advantage of the MagLock system emerges when units are combined. A straight unit flanked by two slope panels creates a wide display wall with angled wings. A curved center unit with straight extensions on both sides builds a concave environment that wraps the visitor's sightline. An arch unit above a straight panel creates a dramatic framed entrance. Because all magnetic fabric banner stand shapes in the MagLock series connect at the edges using the same embedded magnet system, there is no hardware compatibility concern — you configure whatever layout fits your booth space, and reconfigure it differently for the next event.

Note: If you are looking for a standard fabric banner stand without the magnetic modular connection system, see our fabric banner stands. For accordion-style spring pop-up fabric displays, see our fabric pop up displays.

Magnetic Fabric Banner Stand vs. Standard Fabric Banner Stand — What's the Difference?

Both product types use a lightweight aluminum tube frame and a dye-sublimation fabric graphic. The difference lies in how the frame assembles and whether units can connect to each other.

A standard fabric banner stand uses push-button snap connectors between tubes. It assembles quickly and reliably, but each unit is independent — one stand, one display, finished. The frame is lighter and the price point is lower, making it the right choice for a single portable display that travels alone.

A magnetic fabric banner stand uses embedded magnets in the tube ends that self-align and auto-lock without any manual connector manipulation. Setup is faster under pressure because there is nothing to "find" — the magnets guide you. More importantly, any two MagLock units connect edge-to-edge, making them modular: start with one straight unit, add a curved unit for the next show, connect a slope and an arch for a major exhibition. The display grows with the budget and the occasion rather than requiring a new hardware purchase for each configuration upgrade.

For exhibitors who set up multiple times a month, run multi-city tours, or want a display system that scales from a single unit to a full backwall without replacing hardware, the magnetic modular display stand is the more cost-effective long-term choice.

Magnetic Fabric Banner Stand Sizes

Our MagLock magnetic fabric banner stands are available in the following standard configurations. All shapes are cross-compatible within the MagLock series for modular side-by-side connection.

For custom booth configurations combining multiple MagLock shapes, use our quote request form or call (541) 392-6203 — our exhibit team will design the right combination for your booth footprint and budget.

Where Magnetic Pop Up Display Stands Are Used

• Trade show booths: The MagLock system's modular nature makes it the display system of choice for exhibitors who want a different booth layout configuration at different shows without buying new hardware each time. Start with a straight unit for a 10×10 inline booth, add curved and slope panels for a 10×20 island at the next major show. Complement your setup with our trade show display counters for a complete branded exhibit environment.
• Corporate lobbies and brand installations: A magnetic curved fabric banner stand in a reception area or corporate lobby creates a permanent-feeling brand installation that can be updated by replacing the fabric graphic — no contractors, no drilling, no wall damage. The self-supporting curved frame stands without floor anchoring, which means it can be repositioned for different events without any setup effort.
• Retail promotions and POP displays: A magnetic straight banner stand or slope unit at a retail entrance or beside a featured product creates a premium branded focal point. Because the graphic swaps without replacing the frame, the same hardware serves seasonal promotions, product launches, and sale events throughout the year.
• Product launches and corporate events: For brand activations, press events, and product launch environments, a multi-unit MagLock configuration — straight center, curved wings, slope accents — creates the kind of custom-looking branded environment that typically requires a custom-built exhibit, at a fraction of the cost and a fraction of the setup time.
• Photography backdrops and media walls: The wrinkle-free fabric surface of a magnetic fabric banner stand, stretched taut by the MagLock frame tension, provides an ideal matte anti-glare backdrop for event photography. Multiple units connected side by side create a seamless wall-to-wall backdrop for red carpet moments, award ceremonies, and press photo opportunities.

How to Order Your Custom Magnetic Fabric Banner Stand

1. Choose your shape and quantity: Select straight, curved, slope, or arch — or combine shapes for a modular configuration. If you are building a multi-unit display, our exhibit team can help you design the combination that fits your booth dimensions.
2. Upload your artwork: Submit your logo, brand assets, and any design direction. Free templates sized to every MagLock stand shape are available on individual product pages. No artwork? Our in-house designers create the graphic from scratch at no extra cost.
3. Approve your free 3D mockup: Within 24 hours our design team delivers a photorealistic render of your assembled magnetic pop up display stand. For multi-unit configurations we will render the full assembled setup so you can see the entire display before approving. Request any revisions — no payment required at this stage.
4. Print and ship: Production begins on proof approval. Your magnetic fabric banner stand ships within 5–6 business days with free delivery to all 48 contiguous US states.

Not sure which configuration fits your booth? Start with a free 3D design mockup — show us your booth dimensions and brand assets and our design team will propose the right MagLock layout before you spend anything.