Tent Flag Mount Holder - Hex 50MM Frame (Standard)
Tent Flag Mount Holder for 50mm Hex Frame Canopies
Built for heavier 50mm hexagonal tent frames, this flag mount holder puts a feather or teardrop flag right on your canopy leg. Each black bracket has a hex-shaped channel that wraps the 50mm leg and locks with wing-nut bolts, and a vertical flag spigot holds the pole above the tent corner. Installation takes a minute and needs no tools. The holders come as a pair for both front legs and work with our standard advertising flags; small flag sizes are recommended.
Flag Mount Holder at a Glance
Everything you need to fly two flags from a 50mm hex tent.
| Feature | Tent Flag Mount Holder - Hex 50mm Frame |
|---|---|
| Frame Fit | 50mm hex legs |
| Bracket | Hex channel, black |
| Fastening | Wing-nut bolts |
| Flag Type | Standard flags, small size |
| Quantity | 1 pair |
| Price | $75 |
40mm hex and square frame holders are sold separately.
Where to Use It
A flag above your tent helps at:
- Commercial booths: heavy-duty 50mm tents at busy venues.
- Sports tournaments: team and sponsor flags.
- Expos and trade shows: find-me flags over the aisle.
- Outdoor festivals: brand visibility from a distance.
What's Included
- 2 flag mount brackets for 50mm hex legs (pair)
- Wing-nut bolts fitted to each bracket
- Vertical flag spigot on each bracket
- Fits 50mm hexagonal pop up tent legs
- Flag, pole and tent not included
Features & Benefits
- Sized for 50mm Hex Legs: The hex channel follows the leg shape for a firm grip.
- Wing-Nut Bolts: Hand-tighten the bracket onto the leg in seconds.
- Upright Spigot: Holds the flag pole straight above the tent corner.
- Pair for Both Corners: Two flags frame your booth front evenly.
- Black Finish: Looks neat against the tent frame.
- Reusable: Loosen, remove and pack with your tent.
Specifications
| Type | Tent flag mount holder, standard |
|---|---|
| Frame Fit | 50mm hexagonal pop up tent legs |
| Bracket | Hex channel bracket, black |
| Fastening | Wing-nut bolts, hand-tightened |
| Flag Fit | Standard advertising flags; small sizes recommended |
| Sold As | 1 pair (left and right) |
Using a 40mm hex or square leg tent? Choose our matching flag mount holder instead.
Which Flag Mount Holder Do I Need?
Match the holder to the legs of your tent frame.
| Tent Frame | Holder | This Page |
|---|---|---|
| 50mm hex legs | Hex 50mm Frame - Standard | Yes |
| 40mm hex legs | Hex 40mm Frame | Separate product |
| Square legs | Square Frame - Standard | Separate product |
About 50mm (2 in) across the flat sides of the leg means this holder.
How to Mount the Flag Holder
Five steps, no tools needed:
- Set Up the Tent: Open the canopy and lock the legs.
- Place the Bracket: Fit the hex channel against a front leg at the height you want.
- Lock It: Tighten the wing-nut bolts until the bracket is firm.
- Fit the Flag: Slide the flag pole onto the spigot.
- Second Corner: Repeat on the other front leg.
Add a Custom Flag
Pair the holders with our custom feather and teardrop flags to fly your logo over the booth.
50mm Hex Flag Bracket: No Design Needed
The black bracket is hardware only. Order your printed flag on its own page.
50mm Hex Check
| Leg width across flats | About 50mm / 2 in |
|---|---|
| Bracket | Black hex channel |
| Lock | Wing-nut bolts |
| Flags | Standard type, small |
Pro Tips
- Seat the hex channel flat on the leg.
- Tighten wing nuts top to bottom.
- Use weights on every leg.
- Lower flags in gusty weather.
- Keep brackets with the 50mm frame.
50mm Hex Flag Bracket FAQs
Fit, fastening, flags and price.
Does it fit heavy-duty 50mm hex tents?
Yes, the hex channel bracket is made for 50mm hexagonal legs.
What locks it in place?
Wing-nut bolts that you tighten by hand.
What's in the pair?
Two black brackets, each with an upright flag spigot.
Which flags suit it?
Standard type advertising flags, ideally in small sizes.
Is assembly needed?
No, the bolts come fitted; just place and tighten.
Do flags come with it?
No, they are sold separately.
I have a 40mm frame, will it work?
No, pick the Hex 40mm holder instead.
What is the price?
$75 for the pair.
Installing 50mm Hex Flag Brackets
Once the canopy is up as shown in the video, fit the brackets.
Bracket Install
- Raise the frame. Lock the 50mm legs.
- Place the channel. Fit it to a front leg.
- Tighten the top bolt. Hand-turn the wing nut.
- Tighten the rest. Work downward.
- Fit the flag. Slide the pole over the spigot.
- Second bracket. Repeat on the other leg.
Care Notes
- Store brackets with the frame.
- Check bolts before each event.
- Wipe off mud and dust.
- Questions? Email sales@signagebuzz.com.
